The SMT Shuttle Conveyor is utilized for transporting boards from one line into two lines, or vice versa, without altering the orientation of the board during traversing. This conveyor features a PLC control system, ensuring reliable and precise operation. It includes a smart system with one-key width adjustment and remote fault monitoring, enhancing convenience and operational efficiency. The buffer deceleration design allows for smoother and more accurate transitions of the PCBs. The width of the PCB board can be adjusted conveniently and accurately using a screw adjustment mechanism. Additionally, the shuttle conveyor is equipped with a standard SMEMA interface, enabling easy integration with other equipment on the production line.
Used for good/bad PCB separation or visual inspection without interrupting the PCB flow. It supports up to 5 PCB floors with 25mm spacing.
This unit rotates a PCB 90° before transferring it to a downstream modular placement machine. As the PCB is lifted, the conveyor automatically adjusts to the set PCB length. After rotation, the PCB is transferred out sideways, but the operation can also be reversed to transfer the PCB out lengthways. The machine is used in bulk material lines, with its primary functions being PCB rotation, transmission, and detection. It features a PLC control system and an HMI control panel for user-friendly operation. The hermetic design of the rotating mechanism guarantees the highest level of safety protection, and the top safety cover can be opened for easy machine maintenance. The unit ensures smooth and precise rotation, powered by either a motor or a cylinder. It also offers parallel and smooth width adjustment via a lead screw, allowing for consistent handling of different PCB sizes. The conveying flow direction of the PCB can be customized according to the user's needs. Additionally, the machine includes a connection transition section, which offers speed advantages over the large translation scheme of a two-line shared reflow oven. The rotation angle is selectable between 90° and 180°, providing flexibility for various production requirements. The unit is equipped with a standard SMEMA interface for seamless integration with other equipment.
This equipment is mainly used for PCB dust removal and static electricity removal. With the static eliminator, the effect is better and the yield rate is higher. This equipment is designed for PCB panel dust removal, static electricity elimination, and cleaning of surface abnormalities. The electrostatic removal rod features a static eliminator to effectively eliminate static electricity on the product, resulting in better dust removal, higher product quality, and improved yield. It is convenient to replace the dust collection paper rolls, making equipment maintenance and cleaning easy. Regularly changing the paper roll is a straightforward process. The dust collection paper roll uses air pressure to control the contact and pressure between the rubber roller and the product surface, ensuring a better dust removal effect without scratching the product surface. The dust removal roller works in conjunction with the roll to stick dirt and transfer it to a sticky dust film, which can be peeled off layer by layer for efficient cleaning.
Need help to find the right solution with our experts?
CONTACT
Address: Room 301, Building 12, No. 2 Fumin Middle Road, Dalang Town,Dongguan, Guangdong Province 523770, China.
Email: info@seiki-hk.com
Tel: +86 19917563620
Follow
Scan attention consultation
Privacy Policy SEO Citysite Support: 300.cn Dongguan